PRODUCTSAngle (Equal)

 



Hot Rolled Structural Steel sections produced by OneSteel are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel

Make : Sail, Rolling, Plate Cut.
Hot-rolled bars and sections.

Grades other than shown below may also be available depending upon section and quantity requirements. For additional information please contact a OneSteel Office near you.

For information on section & tensile properties and chemical composition for Equal Angles select the appropriate link from the right hand menu. For information on manufacturing tolerances please refer to AS/NZS 3679.1.


Additional Info


Size Range: 25x25 EA to 200x200 EA
Standard Length: 7.5m, 9.0m, 10.5m, 12.0m, 13.5m, 15.0m
Thickness Range: 3mm to 26mm
AS Standard: AS/NZS 3679.1

Angles ( Equal Sides )
Sides In Thickness in mm - Weight in kg per metre
mm equivalent 3 4 5 6 8 10 12 15 16 18 20  
20 X 20 mm 0.9 1.1                   kg /m
25 X 25 mm 1.1 1.4 1.8                 kg /m
30X 30 mm 1.4 1.8 2.2                 kg /m
35 X 35 mm 1.6 2.1 2.6 3.0               kg /m
40 X 40 mm 1.8 2.4 3.0 3.5               kg /m
45 X 45 mm 2.1 2.7 3.4 4.0               kg /m
50 X 50 mm 2.3 3.0 3.8 4.5               kg /m
55 X 55 mm     4.1 4.9 6.4 7.9           kg /m
60 X 60 mm     4.5 5.4 7.0 8.6           kg /m
65 X 65 mm     4.9 5.8 7.7 9.4           kg /m
70 X 70 mm     5.3 6.3 8.3 10.2           kg /m
75 X 75 mm     5.7 6.8 8.9 11.0           kg /m
80 X 80 mm       7.3 9.6 11.8 14.0         kg /m
90 X 90 mm       8.2 10.8 13.4 15.8         kg /m
100 X 100 mm       9.2 12.1 14.9 17.7         kg /m
110 X 110 mm         13.4 16.6 19.7   25.7     kg /m
130 X 130 mm         15.9 19.7 23.5   30.7     kg /m
150 X 150 mm           22.9 27.3   35.8     kg /m
200 X 200 mm             36.9   48.5     kg /m